Mark positions of Feed Throughs, Drill holes, Anchors and other locations, on the floor or overhead,  with our Prism Pole Permanent Marker adapter.

Use with your Trimble, Topcon, Sokkia, Carlson or Leica robotic total station BIM / MEP interior layout system.

Replace the point on the end of your prism pole with our Prism Pole Permanent Marker adapter, level up the pole, and push to mark layout points for interior construction. Push lean and roll to “flag” the mark for better visibility.

Available on backorder

SKU: PPMA-03 Categories: ,


Fits any prism pole with 5/8″-11 stud.
We designed the PPMA-03 to use readily available, inexpensive, disposable
office supply type permanent markers (2 included).

The PPMA-03 is designed to hold up to 9 LBS with out marking unintentionally. This is enough to support a typical* 8’ prism pole, 360° Robotic Prism and Data collector.

Not recommended for use with Valve Action markers.
Pressing the tip of a valve action marker causes ink to flow
which would cause excessive ink discharge.

*Some Layout pole assemblies may exceed 9lbs. Contact us for more information.
Please provide the static weight of your assembly when calling.

Additional information

Weight 2 lbs
Dimensions 6 × 2 × 2 in